View FG080036DSSWBG01_7699545.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

confidential document FG080036DSSWBG01 rev:1 page: 1 /17 data image corporation tft module specification preliminary item no.: FG080036DSSWBG01 table of contents 1. cover & contents ??????????????????????????????????????????????? 1 2. record of revision ????????????????????????????????????????????? 2 3. general specifications ??????????????????????????????????????? 3 4. absolute maximum ratings ??????????????????????????????? 3 5. electrical characteristics ?????????????????????????????? 3 6. interface specifications ??????????????????????????????????? 4 7. optical characteristic ?????????????????????????????????????? 7 8. pin connections ???????????????????????????????????????????????????? 10 9. block diagram ????????????????????????????????????????????????????? 12 10. quality assurance ???????????????????????????????????????????? 13 11. lot numbering system ????????????????????????????????????????? 14 12. lcm numbering system ???????????????????????????????????????? 14 13. precautions in use lcm ??????????????????????????????????????? 15 14. outline drawing ??????????????????????????????????????????????????? 16 15. package information ??????????????????????????????????????????? 17 customer companies r&d dept. q.c. dept. eng. dept. prod. dept. jack eric ken huang approved by version: issued date: sheet code: total pages: 1 2008/6/30 17 hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 2 /17 2. record of revision rev date item page comment 1 30/jun/08 initial preliminary hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 3 /17 3. general specifications parameter specifications unit screen size 8 (diagonal) inch display format 800(h) x (r,g,b) x 600(v) dot active area 162(h) x 121.5 (v) mm dot pitch 0.0675 (h) x 0.2025 (v) mm pixel configuration r.g.b.-stripe outline dimension 183(w) x 141(h) x 8.8 (d) max. mm surface treatment anti-glare back-light led display mode normally white weight tbd g view angle direction 6 o?clock our components and processes are compliant to rohs standard 4. absolute maximum ratings gnd= 0v parameter symbol min. max. unit remark power supply voltage v cc -0.3 +4.0 v logic input voltage vi -0.3 vcc+0.3 v operating temperature top -20 70 c storage temperature tst -30 80 c - 5. electrical characteristics a) module gnd= 0v, ta=25 c , dclk=39.79 mhz parameter symbol min. typ. max. unit remark power supply voltage v cc 3.0 3.3 3.6 v power supply current i cc -- tbd -- ma v cc =3.3v ripple voltage v rf - - 100 mv p-p b) backlight driving conditions ta=25 c parameter symbol min. typ. max. unit remark led voltage v l 9 10.5 v note 1 led current i l -- 200 -- ma led life time 30000 hr note 2 note 1: v l =a-k note 2: the ?led life time? is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25 and
i l =200ma. hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 4 /17 6. interface specifications 6.1 input signal characteristics 6.1.1 ac electrical characteristics parameter symbol min. typ. max. unit data setup time t dsu 6 - - ns data hold time t dhd 6 - - ns den setup time t esu 6 - - ns 6.1.2 resolution j 800x600 parameter symbol min. typ. max. unit clk frequency f cph 30.5 39.79 42 mhz clk period t cph 23.81 25.13 32.79 ns clk pulse duty t cwh 40 50 60 % de period t deh +t del 1000 1056 1200 t cph de pulse width t dh - 800 - t cph de frame blanking t deb 10 28 110 t deh +t del de frame width t de - 600 - t deh +t del 6.2 timing controller timing chart 6.2.1 clock and data input waveforms figure 1 clock and data input waveforms. hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 5 /17 n=800 figure 2 de mode data format hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 6 /17 6.3 color data input assignment 6.4 pixel format image following figure shows the relationship of the input signals and lcd pixel format j data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 0 0 00 0 00 0 0 00 0 00 0 0 0 0 red 1 1 11 1 10 0 0 00 0 00 0 0 0 0 green 0 0 00 0 01 1 1 11 1 00 0 0 0 0 blue 0 0 00 0 00 0 0 00 0 11 1 1 1 1 cyan 0 0 00 0 01 1 1 11 1 11 1 1 1 1 magenta 1 1 11 1 10 0 0 00 0 11 1 1 1 1 yellow 1 1 11 1 11 1 1 11 1 00 0 0 0 0 basic colors white 1 1 11 1 11 1 1 11 1 11 1 1 1 1 red(0) / dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 gray scale of red red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green(0)/ dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : green(61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 gray scale of green green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue(0)/ dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue (2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 gray scale of blue blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 7 /17 7. optical characteristic 7.1. specification: parameter symbol condition min. typ. max. unit remarks x + 55 65 -- horizontal x - 55 65 -- vertical y + 45 55 -- viewing angle y - center cr 10 55 65 -- deg note 1,4 contrast ratio cr max. center 300 400 -- note 1,3 rise tr - 15 -- ms response time fall tf center x= y =0 - 35 -- ms note 1,6 brightness uniformity b-uni x= y =0 70 75 -- % note1,5 central luminance l il =200ma 240 300 -- cd/ note 1,2 x w 0.26 0.31 0.36 white chromaticity y w center x= y =0 0.28 0.33 0.38 note 1,2 image sticking tis 2 hours 2 sec note 7 the following optical specifications shall be measured in a darkroom or equivalent state(ambient luminance 1 lux, and at room temperature). the operation temperature is 25 c 2 c, and led current i l =200ma . the measurement method is shown in note1. note1: the method of optical measurement: note2: measured at the central point of the lcd module and at the viewing angle of the x= y=0 note3: definition of contrast ratio (cr): luminance with all pixels in white state cr = luminance with all pixels in black state hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 8 /17 note 4: definition of viewing angle(cr 10): note 5: definition of brightness uniformity (b-uni): luminance measuring points 123 456 789 minimum luminance of 9 points b-uni ? maximum luminance of 9points note6: definition of response time: the response time is set initially by defining the ?rising time (tr)? and the ?falling time (tf)? respectively. tr and tf are d efined as following figure. hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 9 /17 note 7: definition of image sticking (tis): continuously display the test pattern shown in the figure below for 2 hours. then display a completely white screen. the previo us image shall not persist more than 2 sec at 25 c image sticking pattern white area black area hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 10 /17 8. pin connections 8.1 tft lcd panel driving section pin name description remark 1 vcc power supply 2 vcc power supply 3 gnd ground 4 gnd ground 5 rxin0- differential data input, ch0 (negative ) 6 rxin0+ differential data input, ch0 ( positive ) r0 ~ r5, g0 7 gnd ground 8 rxin 1- differential data input, ch1 ( negative ) 9 rxin 1+ differential data input , ch1 ( positive ) g1 ~ g5, b0, b1 10 gnd ground 11 rxin 2- differential data input , ch2 ( negative ) 12 rxin 2+ differential data input , ch2 ( positive ) b2 ~ b5, nc, nc,de 13 gnd ground 14 ckin- differential clock input ( negative ) 15 ckin+ differential cl ock input ( positive ) dclk 16 gnd ground 17 nc no connection 18 nc no connection 19 gnd ground 20 gnd ground hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 11 /17 8.2 backlight unit section pin no. symbol i/o function remark 1 a p power supply for backlight unit pink 2 k p ground for backlight unit white 8.3 power signal sequence t1 10ms : 1 sec t5 50ms t2 : 200ms t6 0 < t3 50ms: 200ms t7 0 < t4 10ms vcc =3.3v hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 12 /17 9. block diagram 800(r,g,b)x600 pixel gate driver source driver timing control source driver dc/dc converter lvds receiver vcc gnd rxin0 ( +/- ) rxin1(+/-) rxin2 (+/-) ckin(+/-) hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 13 /17 10. quality assurance 10.1 test condition 10.1.1 temperature and humidity(ambient temperature) temperature : 25 5 c humidity : 65 5% 10.1.2 operation unless specified otherwise, test will be conducted under function state. 10.1.3 container unless specified otherwise, vibration test will be conducted to the product itself without putting it in a container. 10.1.4 test frequency in case of related to deterioration such as shock test. it will be conducted only once. 10.1.5 test method reliability test item & level no. test item test level 1 high temperature storage test t=80 ,240hrs
2 low temperature storage test t=-30 ,240hrs
3 high temperature operation test t=70 ,240hrs
4 low temperature operation test t=-20 ,240hrs
5 high temperature and high humidity operation test t=60 ,
90%rh,240hrs 6 thermal cycling test (no operation) -30 +25 +

80 ,
100 cycles 30 min 5 min 30 min 7 vibration test (no operation) frequency j 10 ~ 55 hz amplitude j 1.5 mm sweep time j 11mins test period j 6 cycles for each direction of x,y,z 8 shock test (no operation) 100g, 6ms direction j x, y, z cycle j 3 times hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 14 /17 11. lot numbering system 9 7 4 2 production week number production year 12. lcm numbering system fg 080036 d s s w b g 01 version :01 rohs view direction & temp. range a y bottom view 6h & normal temp. b y bottom view 6h & wide temp. c?top view & normal temp d?top view & wide temp. backlight color w ?white y ? yellow green g - green backlight c?ccfl b/l s ?led b/l lcd polarize type n?negative s ? super wide view m?transmissive f? transflective lcd type a ?tft analog d ?tft digital series code 080036 ?, 8 inch model type fg?standard tft module fx?custom tft module hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 15 /17 13. precautions in use lcm 1. liquid crystal display (lcd) lcd is made up of glass, organic sealant, organic fluid, and p olymer based polarizers. the following precautions should be taken when handing, (1). keep the temperature within range of use and storage. excessive temperature and humidity could cause polarization degradation, polarizer peel off or bubble. (2). do not contact the exposed polarizers with anything harder than an hb pencil lead. to clean dust off the display surface, wipe gently with cotton, chamois or other soft material soaked in p etroleum benzin. (3). wipe off saliva or water drops immediately. contact with water over a long period of time may cause polarizer deformation or color fading, while an active lcd with water condensation on its surface will cause corrosion of ito electrodes. (4). glass can be easily chipped or cracked from rough handling, especially at corners and edges. (5). do not drive lcd with dc voltage. 2. liquid crystal display modules 2.1 mechanical considerations lcm are assembled and adjusted with a high degree of p recision. avoid excessive shocks and do not make any alterations or modifications. the following should be noted. (1). do not tamper in any way with the tabs on the metal frame. (2). do not modify the pcb by drilling extra holes, changing its outline, moving its components or modifying its pattern. (3). do not touch the elastomer connector, especially insert an backlight panel (for example, el). (4). when mounting a lcm make sure that the pcb is not under any stress such as bending or twisting . elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of the elements. (5). avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose contact, resulting in missing pixels. 2.2. static electricity lcm contains cmos lsi?s and the same precaution for such devices should apply, namely (1). the operator should be grounded whenever he/she comes into contact with the module. never touch any of the conductive p arts such as the lsi pads, the copper leads on the pcb and the interface terminals with any parts of the human body. (2). the modules should be kept in antistatic bags or other containers resistant to static for storage. (3). only properly grounded soldering irons should be used. (4). if an electric screwdriver is used, it should be well grounded and shielded from commutator sparks. (5) the normal static prevention measures should be observed for work clothes and working benches; for the latter conductive (rubber) mat is recommended. (6). since dry air is inductive to statics, a relative humidity of 50-60% is recommended. 2.3 soldering (1). solder only to the i/o terminals. (2). use only soldering irons with proper grounding and no leakage. (3). soldering temperature : 280 c 10 c (4). soldering time: 3 to 4 sec. (5). use eutectic solder with resin flux fill. (6). if flux is used, the lcd surface should be covered to avoid flux spatters. flux residue should be removed after wards. 2.4 operation (1). driving voltage should be kept within specified range; excess voltage shortens display life. (2). response time increases with decrease in temperature. (3). display may turn black or dark blue at temperatures above its operational range; this is (however not pressing on the viewing area) may cause the segments to appear ?fractured?. (4). mechanical disturbance during operation (such as p ressing on the viewing area) may cause the segments to appear ?fractured?. 2.5 storage if any fluid leaks out of a damaged glass cell, wash off any human part that comes into contact with soap and water. never swallow the fluid. the toxicity is extremely low but caution should be exercised at all the time. hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 16 /17 14. outline drawing "11307&% "65) 3&7*4*0/4 %&4$3*15*0/ %"5& "11307& %3"8/ $)&$, %"5& 4$"-& 5*5-& %8(/0 4)&&50' 3&7 %"5" *."(& 6/*54 .. "#$%& ' 5'50vumjof%jnfotjpo '(%( 3ftpmvujpoy3(#y /05& (fofsbmupmfsbodf?nn 'ps3p)4 $0-038ijuf
$0-031jol
1*/ 1*/ -&%dpoofdupsgpscbdlmjhiu+45#)4374psfrvjwbmfou .budijohdpoofdups+454.##)44 $/dpoofdups)jsptf%'"1)psfrvjwbmfou .budijohdpoofdups)jsptf%'4$psfrvjwbmfou hy-line computer components / www.hy-line.de/computer
confidential document FG080036DSSWBG01 rev:1 page: 17 /17 15.package information hy-line computer components / www.hy-line.de/computer

▲Up To Search▲

Price & Availability of FG080036DSSWBG01

	To Download FG080036DSSWBG01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .